The QR code below is compatible with the following models of Zebra Scanners:
- DS9208
- DS9308
- DS7708
It is not recommended for:
- SP7201
- SP7208
- Any model of Elo scanner
For SP7201 & SP7208, please see the programming barcodes below (and attached). For Elo scanners, see Reprogramming Rounded Elo Scanners.
ISSUE: When attempting to scan a barcode or QR code, the scanner will not detect the barcode/QR code at all or the scanner will detect it and there will be an audible beep from the scanner but nothing populates on the screen.
RESOLUTION: Scan the programming QR code below. This is a custom programming code that was created by Tapin2 with the settings needed for our application. After scanning the QR below, please reboot the kiosk/KDS.
- If the above QR code does not work, please scan the codes below, in order from 1 to 3.
- 4 and 5 are optional if you would like to enable or disable QR code scanning (helpful when a product has a QR code next to the UPC barcode).
The five barcodes above can also be found in the PDF attached if you need a higher-quality image of each barcode.
After rescanning the barcodes above, please reboot the kiosk/KDS.
***Important Note***: After scanning, you will need to reboot the Elo device and also power-cycle any local printers, if that device has one connected.